To remove mold from timber surfaces, a mix of home detergent and water used with a sponge or brush might be all that is necessary. In certain more demanding cases, careful sanding or perhaps replacement is called for. But, mold spores may be harmful, so many infestations must be assessed by professionals with the correct training and removal methods. For DIY homeowners, here is how to remove mold from wood.
How to Remove Mold from Wood
1. Use a soft brush or sponge and avoid rinsing
A soft brush or sponge dipped into the mix may be used to wipe off the mold from the wood surfaces. Once the signs of mold have been eliminated, the timber shouldn’t be rinsed. Added water could cause new mold growth on the timber, negating the cleanup attempts. The target is to wash the area and make it less likely to support mold growth as soon as possible.
2. Bleach must not be used
Non-porous surfaces such as wood and shingles give the mold plenty of nooks and crannies to hide in, taking mold spores out of reach of even the most careful bleach scrub. The mold will just re-grow from inside these micro-crevices soon after cleaning. In addition, bleach loses its capacity to kill mold rapidly after it’s manufactured. Last, bleach is a powerful compound, posing risks to eyes and skin, and maybe particularly bad for children.
3. Sand if needed
If cleaning the mold from the wood has left spots behind, the stains may have to be sanded away. Employing the best sandpaper may get the job done. Some hardware stores sell little variety packs of distinct self. Wearing protective gear is also necessary, as mold spores may be released during sanding, and they pose health risks. Inexpensive, flexible N95 masks are available in hardware stores.
4. Replace the timber
Another option is to get the timber removed, discarded, and replaced. Often, wood replacement requires less time and effort than one might expect in relation to the labor intensiveness of cleaning big or difficult wooden surfaces.
5. Vacuum the region
Once the mold was removed from the wooden things, a HEPA vacuum cleaner ought to be used to trap mold spores from the atmosphere. Most shop vacuums don’t have a filter capable of trapping mold spores. Some household vacuums, such as the ones from Dyson, have built-in HEPA filtering, but care must be used when draining the debris into the trash.
6. Hire a professional firm
When unsure how to proceed, a professional mold remediation company should be contacted. They can enable the owner to determine if cleaning the mold is feasible or when replacement is more preferable. They can also provide tips on products and techniques to use — or simply deal with the cleanup for the proprietor. The right approach may save a home, but it may also help the owner prevent getting sick from the spores.
For mold removal and remediation, contact the pros!
When it comes to mold growth problems, prevention is the best medicine. Controlling the indoor humidity and repairing water flows helps a whole lot. For mold remediation solutions and property restoration in any house, the PuroClean staff is standing by. Check this link to learn more.